To set up our script to do this, we must examine the text that displays
during a normal login procedure (i.e. when we dial and log in
manually). To do this, we can capture the text in the buffer and look
at it later.

Listed below is a sample buffer capture of the text sent from Eskimo
North during the login procedure. Any text that we had to type, in
response to a prompt, is shown in bold.

0) Apply for a 2-week free trial
1) Connect to Eskimo    [general login session]
2) Connect to Eskinews    [uqwk uucp and mud maintenance]
3) Connect to Isumataq    [irc bots only]
4) Connect to Tial        [use this host for TIA slip]
5) Connect to Mail        [use for UUCP mail connection]
8) Western Washington BBS List
9) Exit

Your selection ==> 1

New Users - please type "new".

Type your login in lower case (small letters).
Passwords are case-sensitive THISPW != thispw.
Passwords will not echo.

login: voyager
Password: *********

Last login: Mon Jun 26 13:55:30 from tial.eskimo.com
SunOS Release 4.1.4 #2: Tue Jun 27 04:07:39 PDT 1996
North Everett        : (206) 258-0759  300 bps - 14.4kbps
South Everett        : (206) 742-1150  300 bps - 14.4kbps
Seattle/Maple Vlly   : (206) 367-3837  300 bps - 14.4kbps
Des Moines/Kent      : (206) 838-9513  300 bps - 14.4kbps
Tacoma/Auburn        : (206) 927-3218  300 bps - 14.4kbps
East Side Line       : (206) 451-8876  300 bps - 14.4kbps
Enumclaw/Blk Dmnd    : (206) 939-5992  300 bps - 14.4kbps
Buckley              : (360) 802-0992  300 bps - 14.4kbps

Eskimo North Users Meeting: Sunday July 20th 2:30PM @
Ballard Godfathers (63rd Street and 15th Ave N.W.)

You have new mail.

Main Command?

Notice that there were three places we had to type in a response: