Novaterm 9.6 User's Guide
C= H - Hang up the phone. This hangs up the modem.
C= I - Hayes modem initialization. This command sends the
modem initialization string to the modem only if you have specified a
Hayes-compatible modem in your configuration.
C= J - Pick up phone. This takes the modem off the hook.
C= K - Toggle control character display. When this is turned on,
any control characters printed in terminal mode are displayed
explicitly. Control characters are those characters generated by
holding down the CTRL key while pressing another key. Normally,
you cannot see them when the terminal tries to print them, because
they are reserved for performing display functions. With this option
on, however, Novaterm displays the CTRL-A character with the two
symbols ^A, CTRL-B with ^B, and so forth. The only exceptions are
carriage return and backspace, which retain their normal functions.
When control character display is turned off, any control characters
that are received have their normal effects. The K in the status line
indicates whether this is on or off.
C= L - Load a new function key file (see 3.1.4, Function keys).
C= M - Display a menu of these commands on the screen.
C= N - Display the amount of free buffer space in bytes and
equivalent disk blocks.
C= O - Open/close buffer capture file. Pressing C= O prompts you
for a file name, and then opens a file in the buffer for receiving text.
Any text that is subsequently displayed on the screen is stored in the
buffer file as well. Pressing C= O again closes the buffer file.
C= P - Select protocol. (see 3.4.3, Selecting a protocol)
C= Q - Enter chat mode. This option works in the Standard
terminal emulations only (see 3.1.1, Terminal emulations). In a
Standard terminal emulation, this command provides a 159-
character keyboard buffer (at the top of the screen in 40 columns; at
the bottom in 80 columns) to use in conference chat modes.
C= R - Toggle status line. In 40 columns, turning the status line off
frees up an extra line at the top of the screen for text display.
C= T - Select terminal. (see 3.1.1, Terminal emulations)