option has no effect (see 3.4.3.1, Zmodem).

With this option turned on, Zmodem will operate in "streaming" mode
if the following conditions are met:

• The download device is set to the buffer.
• The baud rate is 2400 bps or less, or,
• The baud rate is 4800 bps or higher and hardware flow control is turned on.

Turning off this option disables streaming mode in all cases. You
should do this if you have trouble downloading from a particular
service in streaming mode. (see section 3.4.3.1, Zmodem for more
information about Zmodem's streaming mode).

4.4.6 Existing files policy

This setting determines what happens during a batch download when a
file to be downloaded already exists on disk.

• Replace:  Deletes the file on disk and creates a new one with the same name.
• Rename:  Renames the incoming file by incrementing the last character of the file name.
• Resume:  If the Zmodem protocol is selected, Zmodem attempts to resume transfer of the file.
• (see 3.4.3.1, Zmodem) If a different protocol is selected, the incoming file name is renamed.

4.5 Configuration file options

4.5.1 Load configuration

This option re-loads the configuration file you previously saved,
reverting all options to their original startup settings.

4.5.2 Save configuration

This option saves all of your current settings to a file. This file is read
by Novaterm when you start the program, and the options are all set
for you at that time.

4.6 Serial device settings

4.6.1 Serial driver

Select the driver corresponding to your serial communications